TNF-27-3 12-Sided Workhouse Kiln

THIS IS A DROP SHIPPED OR SPECIAL ORDER ITEM. PLEASE CONTACT OR LEAVE A NOTE IN THE COMMENTS BOX REQUESTING ESTIMATED WAIT TIME FOR SHIPPING

Paragon TnF-27-3
The TnF-27-3 is easier to load than the deeper studio kilns. It is only 22 _” deep, yet larger inside than the 29” deep 10-sided 24-series kilns.
The TnF-27-3 features sectional construction. Separate the kiln bottom and two sections to repair bricks, change elements, or to move the kiln down narrow stairwells or through the narrowest doorways. Twist-lock spring latches hold the assembled collars securely.
The top row of brick in the TnF-27-3 is 2” high and without element grooves. It is less susceptible to damage during loading than a grooved brick.
The massive, 12-sided Paragon digital TnF-27-3 kiln is a profit center of the busy ceramic studio. It eats up stacks of low-fire ware as well as porcelain and stoneware. It is rated to a full cone 10. At a cost per cubic foot, the TnF-27-3 is one of the most economically priced standard kilns we make.
During busy seasons when orders are backlogged, you will be grateful you own a dependable Paragon kiln. Studio owners call these kilns “real work horses.”
Paragon studio kilns have withstood years of abuse in school environments. High school ceramics teachers fire these kilns unmercifully, without remorse. Yet the kilns keep going. People swear by them.
Easy Access Switch Box
Hinged at the bottom, the switch box on 8, 10 & 12 sided TnF kilns opens forward for easy maintenance. A folding support arm holds the box in the open position. The Sentry is mounted at the top of the switch box within easy reach. Operate it from a comfortable position.
The TnF-27-3 uses deluxe 3” thick firebrick throughout: in the sidewalls, the reversible brick bottom, and the 3” thick lid. The massive lid is easy to lift with Paragon's patented “LiteLid,” which does away with cumbersome pulleys and cords and reduces lid weight to only several pounds of pressure. Most people can lift the lid with one hand. Unlike pulleys and weights, the LiteLid is self-contained on the kiln. No need to drill holes in the ceiling for pulleys. The LiteLid sharply reduces wear between the lid and top rim of firebrick. The truss and floating lid allow expansion of the lid. Ask competitors if their lid spring includes a truss and floating lid.
The 24” wide stand for the TnF-27-3 kiln supports the brick bottom with framing that is 4 _” wide across the top of each side. The stand is rock-steady, with 16-gauge frame and heavy 12-gauge legs.
If you move your kiln out of the way when not in use, order an optional deluxe kiln stand with steel casters.
A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.
You will be amazed at the convenience of digital firing. The reliable solid-state Sentry controller continually monitors the firing so you can spend your time productively without closely watching the kiln. (Please remember, however, to check the kiln during firing and to monitor it near the expected shutoff time.) The sealed touch pad keeps out dust and is easy to wipe clean.
The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.
Other Features
• Lock-in lid support
• Large, tapered peepholes
• Ventilated switch box
• Hand lifts
• Dropped, recessed brick grooves—no pins needed
• Heavy duty elements
• Dust-free coating in the peepholes, both sides of the lid and top rim of firebrick
• Heavy gauge stainless steel case
• Operating instructions silk-screened on the switch box
• Certified to CSA & UL Standard 499
• Full-formed galvanized steel base plate

Max Temperature:
2350F (1287C)

Amps:
48

Phase:
1

Watts:
11500

Nema details:
6-50R
2” dia.

Breaker Size:
60

Circuit Copper Wire Size:
6 gauge

TUV Tested to CSA and UL Standard 499:
Yes

CE:
No

IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

Control Type:
Sentry Digital 12-Key Ceramics

Voltage:
240

Hertz:
60



Kiln Type:
Top Loading Round

Sides: 12

Inner Dimensions

Chamber Volume:
8.11 Cubic Ft. (229.65 Litres)


Chamber Width:
28.00” (711mm)

Chamber Depth:
22.25” (565mm)


Outer Dimension

Outer Size:
36.30”W x 49.80”D x 40.00”H

Ship Weight:
420.00 Lbs (190.51 Kg.)