GP706 115V Kiln
Only 0 left in stock!
This is quite possibly the first commercially available Glass Fusing kiln available on the market. Inspired by genius Bullseye Glass co-founder, Boyce Lundstrum, the GP706 became a staple among the early pioneers of glass fusing.
THIS IS A DROP SHIPPED OR SPECIAL ORDER ITEM. PLEASE CONTACT OR LEAVE A NOTE IN THE COMMENTS BOX REQUESTING ESTIMATED WAIT TIME FOR SHIPPING
Check out item code SkuttGP706VW for this item with a viewing window!
Analog Pyrometer
The GP706 comes with an analog pyrometer that reads the temperature of the kiln chamber in degrees Fahrenheit. Since it is an analog pyrometer (as opposed to digital) it does not require batteries and can be mounted right to the kiln. The Pyrometer comes fully installed on the kiln.
The temperature rate (speed at which the kiln heats up) is controlled by the infinite switch on the kiln. It will take a while to learn the switch settings that create the rate increases you need. It absolutely imperative that you monitor the kiln at all times. When the kiln reaches the temperature you are aiming for you can turn the switch off or you can control the rate of cooling also by using the switch. if all this is too much for you, you may want to upgrade to the HotStart Pro which has a programmable controller.
Plugs Into Household Voltage
Nothing against electricians, but who really enjoys paying to have their house rewired. With the FireBox 14 you take it out of the box, plug it into any spare 120V outlet you have in the house and you are ready to start fusing. Okay, it does need to be a grounded outlet.
Chamber Capacity
Approximately 15 in. x 15 in. opening and 6 in. high: 0.6 cubic feet.
Shipping Dimensions:
29" L x 28" W x 18" H (8.46 CuFt)
67 lbs.
| Unit of Measure |
EA |
|---|