Item Name:
Question Mark Blasting Stencils
SKU:
AS-QUESTION
Description:
This is a single-use vinyl sandblasting stencil sheet with a water based adhesive for easy removal. The stencil is designed to create a sharp edged question mark pattern on glass by masking the surface during sandblasting. The sheet measures 8.5 inches by 12 inches and includes an instructional sheet. There is a three sheet minimum purchase requirement, and you can mix three different designs to meet the minimum. The larger question mark images at the top of the sheet are about 0.75 inches to 1 inch in height and width, with proportionally sized medium, small, and very small images below.
How it is used:
- Clean and dry the glass surface so the stencil adhesive bonds evenly.
- Apply the vinyl stencil to the glass and press down firmly to seal the edges of the pattern.
- Sandblast the exposed glass areas to etch the question mark design.
- Remove the stencil by soaking it in water until it releases from the glass.
- Rinse and dry the piece after stencil removal.
Dimensions:
- Sheet size: 8.5 inches by 12 inches
- Approximate margin: 5/8 inch bottom and top
- Large images: about 0.75 inches to 1 inch in height and width
