6" Diamond Topper (1200)
Hurry! Only a few items left in stock!
When the shape is right and the finish matters, step up to 1200 grit. This 6 inch diamond topper applies cleanly to a master plate and gives you the fine, even cut you need before pre-polish and final polish.
6" Diamond Topper (1200)
SKU: DT10-513
Construction
By applying a Diamond Topper to a master backing plate, you are provided with an all around adept and competent replacement surface for tired and worn discs. This topper is prepared with the same high quality as the Diamond Discs, but in a thin format intended to refresh your cutting surface without replacing the full disc system.
It is readied with a pressure-sensitive adhesive backing so it can be applied smoothly and held flat on the backing plate. That adhesive layer keeps the topper stable during use and makes changeover straightforward when you are rotating through grit stages.
Why and When It Is Used in Lampworking
In lampworking and scientific glass work, this topper is used during coldworking when you need a very fine, consistent abrasive surface for refining and finishing annealed glass. After shaping and truing with coarser diamond stages, a 1200 grit surface is used to reduce the scratch pattern dramatically and prepare the work for pre-polish and final polish steps.
This is the stage you reach for when the form is already correct and you are focused on surface quality. It is especially useful for cleaning up flat faces, improving clarity on contact surfaces, and producing a controlled finish before moving to polishing compounds or higher grade finishing laps.
Dimensions
- Diameter: 6 inches
- Grit: 1200
| Unit of Measure |
EA |
|---|