Devardi Stringer - Opaque Light Gray
A perfect neutral for everyday beadmaking, this opaque light gray stringer gives you clean lines, soft contrast, and dependable detail work without overpowering your main colors.
Item Name:
Devardi Stringer - Opaque Light Gray
SKU:
DG-D162S
Description:
Devardi Stringer - Opaque Light Gray is hand-pulled soft glass stringer made for 104 COE lampworking. It is produced as thin, consistent strands of opaque light gray glass so it heats quickly and applies cleanly for fine surface decoration without needing to pull your own stringer from a larger rod. Opaque light gray is commonly used when you want neutral linework, soft contrast on both warm and cool base colors, and controlled detailing that stays solid and readable without transparency in the finished work.
How it is used:
Warm the stringer gradually in the outer flame to reduce thermal shock, then bring it into a working flame once it is evenly heat-soaked. Apply the softened tip to your bead or workpiece to make dots, fine lines, borders, scrollwork, and thin wraps. For smooth, even lines, keep the base bead warm and rotate consistently while feeding the stringer at a steady rate. If you want a slightly wider mark, allow a small gather to form at the tip before touching down, then reheat to fully smooth the application into the surface.
Dimensions:
- Stringers are hand pulled 2mm – 3mm thick
- 8" – 12" in length
- Approximately 64 Pieces per Pound
| Unit of Measure |
1/2 LB, 1/4 LB, LB |
|---|