Olympic Kilns - Glass Fusing Clamshell Kiln 12 Cu. Ft

THIS IS A DROP SHIPPED OR SPECIAL ORDER ITEM. PLEASE CONTACT OR LEAVE A NOTE IN THE COMMENTS BOX REQUESTING ESTIMATED WAIT TIME FOR SHIPPING

Model – GF12ECS 240 or 208 volt

Inside dimensions: 60″ wide x 30″ front-to-back x 12″ deep, fires to 1700°F

Olympic Kilns builds affordable, powerful volume-producing glass kilns. Users are provided with equipment that handles capacity loads and large pieces with ease. The Large Capacity glass fusing kilns have many outstanding features and can be designed as top-loading, clamshell loading, or both top and clamshell loading; and as a Bell design with the firing chamber electronically raised and lowered and a removable floor for convenient loading and unloading.

Heavy-Duty Frame and Efficient Insulation

The frames of the Large Capacity glass fusing kilns are built of heavy-angle iron and metal tubing. Kiln walls are 4 1/2″ insulating brick with 1″ ceramic fiberboard and 1″ air space created by the tube frame. The result is an energy-efficient, heavy-load production kiln with a cooler outer surface and lower temperature. These models are built with double-insulated floors consisting of brick and ceramic fiberboard. The kiln’s walls and floor are constructed of kiln brick and board insulation. Kiln brick, ceramic board, and pyro-block modules comprise the easy-opening counter-sprung lid.

Elements, Relays, and Electrical Access

Floor elements, when selected as an option, are controlled by infinite switches that can be adjusted by the kiln operator as needed. Glass fusing production kilns are equipped with heavy-gauge elements and industrial relays for long life. Production volume glass kiln models have a hinged electrical box for easy access and their own breaker box for safety and lockout.

Large Capacity glass kiln models come equipped with a pilot light, heavy angle iron frame, stainless steel jacket, breaker box, KilnStar digital electronic controller, and instruction manuals. One-year Limited Kiln Warranty. Consider upgrading to the Genesis touchscreen controller, lid elements in quartz rods, Type S thermocouple, 2- or 3-zone control, 480-volt, vent, and much more.

Specific Kiln Information

GF12ECS and GF12ETLC Specifications

• Inside Chamber Dimensions w x d x h (inches): 60 x 30 x 12
• Cubic Feet: 12
• Outside Dimensions w x d x h (inches): 82 x 60 x 56
• Brick Thickness: 4 1/2″ + 1″ Fiber
• Maximum Temperature: 1700°F/927°C
• Est Ship Weight: 1,660 lbs
• Plug Configuration: Direct Wired
• Watts: 14,400
• Copper Wire Size: #4, #2 if the circuit is longer than 40 ft

Wiring

1 Phase

• Volts: 208, 240
• Amps: 69 at 208, 60 at 240
• Breaker Required: 90 Amp at 208, 80 Amp at 240

3 Phase

• Volts: 208, 240
• Amps: 46 at 208, 40 at 240
• Breaker Required: 60 Amp at 208, 50 Amp at 240