Olympic Kilns - 146GFE Glass Fusing Kiln

THIS IS A DROP SHIPPED OR SPECIAL ORDER ITEM. PLEASE CONTACT OR LEAVE A NOTE IN THE COMMENTS BOX REQUESTING ESTIMATED WAIT TIME FOR SHIPPING

The Alpha, The Original 14″ Square 120-volt Glass Fusing Kiln!

Model – Square 146GFE – 120 volt

Inside dimensions: 14.5″ x 14.5″ wide x 6″ deep, fires to 1700°F

Working Space and What It Is Used For

The square 14″ glass kiln is built with ample space for large 10″ pieces. Glass-firing kilns are used for fusing and forming glass shapes through slumping, raking, and combing, and can also be used for firing precious metal clay jewelry and other low-fire heat-treating.

Dual-Element Heating Design

The Square 146GFE is equipped with a lid element for the fusing segment of the glass firing and a body element for the ramping-up, ramping-down, and annealing segments of the firing. A selector switch on the electrical box designates whether the lid or body element is to be heated during firing. One element is used at a time because of the limited 120-volt power. If the selector switch remains in the neutral position, neither element will heat.

Standard Equipment

Models come equipped with a pilot light, an 18″ tall metal stand, a stainless steel jacket, and a Bartlett Instruments KilnStar digital controller.

Controller Upgrade and Options

Upgrade to the Genesis touchscreen controller for more ramp-hold user programs and additional features, including delay start, preheat, skip step, and more, for precise firings every time. Messages and information are available for reviewing a firing profile before or during the firing, and viewing the current segment the firing is in.

Options include the lid lift assist, which makes it easy to open and close heavy kiln lids, bead door, quartz glass viewing window, Type S thermocouple, vent, and more!

Specific Kiln Information

Model and build

• Model: Square 146GFE
• Equipped with Lid Lift Assist: Optional
• Inside Chamber Dimensions w x d x h (inches): 14.5 x 14.5 x 6
• Cubic Feet: .73
• Outside Dimensions with Stand or Frame w x d x h (inches): 24 x 24 x 30
• Brick Thickness: 2.5″
• Maximum Temperature: 1700°F/927°C
• Est Ship Wt.: Ships in two boxes – 85/31 lbs.

Wiring Specifications

• 120 Volts
• 16 Amps
• 1920 Watts
• 20 Amp Breaker Required
• Plug Configuration: NEMA 5-20
• Copper Wire Size: #12, #10 if the circuit is longer than 40 ft